FORD TRUCKS

FITS: CLICK HERE TO SEE FITMENT GUIDE  - In summary, if your oil drain plug is a yellow plastic plug, then this item should fit.

• 2021+ Ford F150 Lariat, XL, XLT 2.7 V6
• 2015-2020 Ford F150 2.7L, 3.5L, 5.0L V8
• 2017-2020 Ford Raptor V6 (Gen 2)
• 2018+ Ford Mustang 5.0L V8
• 2019+ Ford Edge ST 2.7L V6
• 2020+ Ford Explorer 3.0L V6
• 2021+ Ford Bronco 2.7L & 3.0L V6
• 2022+ Ford Bronco Sport 1.5L (Choose Bronco Sport option)
• 2022+ Ford Escape
• 2024+ Ford Ranger 2.7L & 3.0L

BEFORE ORDERING, PLEASE MAKE SURE YOUR VEHICLE HAS A YELLOW PLASTIC DRAIN PLUG. NOT ALL VEHICLES HAVE THEM. FORD HAS SWITCHED SOME YEARS/MODELS BACK TO A METAL PAN WITH A CONVENTIONAL DRAIN BOLT. 

REPLACES OEM PN:

kx6z6730b, KX6Z-6730-A, kx6z6730b, KX6Z-6730-B

DETAILS:

Changing your oil can be a messy job, especially with the new plastic style of Ford oil drain plug, which allows the oil to release quickly and make a real big mess under your truck in a hurry.

Our Patented new all-billet aluminum plug has many user friendly features and benefits:

- You can now have full control of how much oil drains and how quickly it drains which means no more mess or risk of burning your hands/arms and spilling oil everywhere. 

- You can even take a small oil sample from the drain with the simple twist of a knob. 

- The secure locking interface means that the plug will never fall out and requires no modifications to the oil pan. Installation requires no additional tools and takes seconds to install. 

-With no maintenance required, you will never have to replace parts or service anything, unlike the stock plug, which requires replacement each oil change, so you'll save money in the long run.

-The magnetic tip of the plug will keep a tight hold onto any stray metal particles in the engine oil and keep them away from internal bearing surfaces, perfect for any new engine. 

-High performance anodized finish, aircraft grade aluminum alloy with stainless steel internals & extreme temperature o-rings means this plug will last a lifetime and take any abuse. Designed for extreme weather and trail conditions. 

INSTALLATION & USE VIDEO:

CUSTOMER VIDEO REVIEWS:

OIL DRAINING 

When draining the oil, we recommend raising the front end of the truck about 9". (Either on ramps, jack stands or a sloped driveway). This will allow the oil in the pan to slope about 5 degrees, which is all that is needed. Anymore than that will not get more oil out. Using this method, about 1/2 cup of oil will remain which is only slightly more than completely removing the plug, which will yield only about 1/4 cup more of oil to come out. For this reason we do not believe it is necessary to remove the Easy Oil Drain Plug completely during oil changes. 

WE HAVE SOLD THOUSANDS OF THESE PLUGS TO CUSTOMERS ALL OVER THE US AND ONLY A SMALL NUMBER (LESS THAN HALF A DOZEN) HAVE MADE MISTAKES, SO PLEASE READ THE PRECAUTION BELOW TO AVOID ISSUES. 

**NEVER USE TOOLS TO INSTALL OR REMOVE ANY COMPONENTS OF THE NEW OIL DRAIN PLUG (EX: PLIERS, WRENCH, VICE GRIPS, CHANNEL-LOCKS ARE ALL A BIG NO-NO!) USING EXCESSIVE FORCE (TORQUE) TO INSTALL OR REMOVE THE PLUG MAY CAUSE DAMAGE TO THE PLASTIC OIL PAN. PLEASE READ ALL PRODUCT INSTRUCTIONS TO AVOID DAMAGE. THE COMMON MISTAKE IS WHEN A CUSTOMER USES A PLIERS TO REMOVE THE GOLD CAP OR TO REMOVE THE BLACK VALVE BODY AND THEY UNKNOWINGLY UNTWIST THE OIL PLUG COMPLETELY WHICH CAN STRIP THE PLASTIC MATERIAL OF THE OIL PAN IF CARE IS NOT TAKEN. IF YOU HAVE TROUBLE REMOVING THE GOLD CAP AND NEED MORE LEVERAGE, USE A BACKUP PLIERS TO HOLD THE BODY OF THE VALVE (THE BLACK PART) WHILE CAREFULLY BREAKING THE GOLD CAP FREE WITH A PLIERS. THIS PREVENTS TORQUE FROM BEING TRANSMITTED INTO THE PLASTIC MATERIAL OF THE OIL PAN. IF YOU NEED TO REMOVE THE PLUG ENTIRELY, JUST MAKE SURE TO PUSH THE ENTIRE PLUG IN TOWARDS HOLE AND TWIST COUNTERCLOCKWISE. USING HAND FORCE WITHOUT TOOLS SHOULD PREVENT YOU FROM DAMAGING ANYTHING. 

A 5/8" ID hose can be attached to the nipple of the drain tool if desired, but not necessary. 

**Installation instructions can the found here HERE

**Replacement parts for the oil plug can be found HERE

**Why are they so expensive compared to other brands?

A sleek and sporty antenna design to make your Ford truck look more modern!

That's why we've designed this 4-inch Ford solid antenna, to give your truck a low-profile sporty look. For those concerned about AM/FM radio reception, you may wish to choose our 8" or 12" antennas, but don't worry, Bluetooth & XM radio are not affected.

Fits Ford Hood Mounted Antennas

• Ford F150 / F250 (F-Series) Trucks (All Years)
• Ford Raptor (All Years)
• Ford Lightning
• Ford Bronco (2021-2023)  (Does not fit Bronco Sport or 2024+ Bronco)
• Ford Ranger (1990-2012)

CARWASH SAFE - Designed with car wash-safe materials and flexible durability so that you can enjoy a worry-free automatic car wash in your Ford F-150, Bronco, Raptor or other Ford pickup truck. 

EASY INSTALLATION - You don't need to be a professional technician to install this antenna. It's so easy, you can do it yourself in a minute! Simply unscrew your old antenna and hand-screw in the new Ronin Factory antenna. 

ANTI-THEFT - Don't be a victim of theft and lose your new antenna to those who would take advantage of you. With built-in thread locking material you can prevent thieves from simply unscrewing and walking away with your antenna. Installation is not permanent and you can still remove it with tools. 

PREMIUM MATERIALS - No plastic used in this antenna! High strength Military Grade anodized aluminum ensure that this antenna will last through all of your adventures! Fade resistant (may fade after long exposure to sunlight, SmartLock antennas have enhanced fade-proof coating)

RADIO SIGNAL STRENGTH - The longer the antenna, the better strength. Thus our 4 inch antenna will provide lower strength reception compared to our 8" or 12" Antennas. Note that it may not be as good of reception as the 36" long OEM antenna that comes on your truck. Rest assured that this will not negatively affect either XM, Bluetooth or Satellite radio

COLOR - To quote the great Henry Ford: "Any customer can have it painted any color that he wants so long as it is black."

A sleek and sporty antenna design to make your Ford truck look more modern!

That's why we've designed this 8-inch Ford flexible antenna, as it will provide medium strength AM/FM radio reception while keeping a low-profile look.

Fits Ford Hood Mounted Antennas

• Ford F150 / F250 (F-Series) Trucks (All Years)
• Ford Raptor (All Years)
• Ford Lightning
• Ford Bronco (2021-2023)  (Does not fit Bronco Sport or 2024+ Bronco)
• Ford Ranger (1990-2012)

CARWASH SAFE - Designed with car wash-safe materials and flexible durability so that you can enjoy a worry-free automatic car wash in your Ford F-150, Bronco, Raptor or other Ford pickup truck. 

EASY INSTALLATION - You don't need to be a professional technician to install this antenna. It's so easy, you can do it yourself in a minute! Simply unscrew your old antenna and hand-screw in the new Ronin Factory antenna. 

ANTI-THEFT - Don't be a victim of theft and lose your new antenna to those who would take advantage of you. With built-in thread locking material you can prevent thieves from simply unscrewing and walking away with your antenna. Installation is not permanent and you can still remove it with tools. 

PREMIUM MATERIALS - No plastic used in this antenna! High grade silicone, brass, stainless steel and Military Grade anodized aluminum ensure that this antenna will last through all of your adventures! Fade resistant (may fade after long exposure to sunlight, SmartLock antennas have enhanced fade-proof coating)

RADIO SIGNAL STRENGTH - The longer the antenna, the better strength. Thus our 8 inch antenna will provide medium strength reception compared to our 12" Antenna. Note that it may not be as good of reception as the 36" long OEM antenna that comes on your truck. Rest assured that this will not negatively affect either XM, Bluetooth or Satellite radio

COLOR - To quote the great Henry Ford: "Any customer can have it painted any color that he wants so long as it is black."

Don't let bad reception get you down!

That's why we've designed this 12-inch flexible antenna, as it will provide the best AM/FM radio reception if tuning in your favorite radio station is important to you.

Fits Ford Hood Mounted Antennas

• Ford F150 / F250 (F-Series) Trucks (All Years)
• Ford Raptor (All Years)
• Ford Lightning
• Ford Bronco (2021 -2023)  (Does not fit Bronco Sport or Bronco 2024+)
• Ford Ranger (1990-2012)

CARWASH SAFE - Designed with car wash-safe materials and flexible durability so that you can enjoy a worry-free automatic car wash in your Ford F-150, Bronco, Raptor or other Ford pickup truck. 

EASY INSTALLATION - You don't need to be a professional technician to install this antenna. It's so easy, you can do it yourself in a minute! Simply unscrew your old antenna and hand-screw in the new Ronin Factory antenna. 

ANTI-THEFT - Don't be a victim of theft and lose your new antenna to those who would take advantage of you. With built-in thread locking material you can prevent thieves from simply unscrewing and walking away with your antenna. Installation is not permanent and you can still remove it with tools. 

PREMIUM MATERIALS - No plastic used in this antenna! High grade silicone, brass, stainless steel and Military Grade anodized aluminum ensure that this antenna will last through all of your adventures! Fade resistant (may fade after long exposure to sunlight, SmartLock antennas have enhanced fade-proof coating)

RADIO SIGNAL STRENGTH - The longer the antenna, the better strength. Thus our 12 inch antenna will provide the most reception out of the sizes we sell. Note that it may not be as good of reception as the 36" long OEM antenna that comes on your truck. Rest assured that this will not negatively affect either XM, Bluetooth or Satellite radio

COLOR - To quote the great Henry Ford: "Any customer can have it painted any color that he wants so long as it is black."

In the event that you lose or damage parts of your oil drain, you can purchase replacement parts here. 

Please note that these parts are not intended to be serviced during the life of the vehicle, these are just replacements if you damage or lose a part. 

Replacement 1/4-20 threaded antenna adapter for our SmartLock™ antennas specifically for Ford & RAM trucks. These adapters thread onto your truck and allow you to install our SmartLock™ antennas. NOTE: THESE ARE EXTRA, SPARE PARTS. These come with SmartLock™ antenna orders. These are only if an existing customer for whatever reason needs a new one.

Replacement threaded 1/4-20 antenna adapter for our TuffLock™ antennas (TuffLock™ Bullet, TuffLock™ Flexible 5", 8" & 12") specifically for Ford & RAM trucks. These adapters thread onto your truck and allow you to install our TuffLock™ antennas. NOTE: THESE ARE EXTRA, SPARE PARTS. These come with TuffLock™ antenna orders. These are only if an existing customer for whatever reason needs a new one.

Replacement set screw for our SmartLock™ antennas. This small set screw is used to hold the SmartLock™ antennas in place. NOTE: THESE ARE EXTRA, SPARE PARTS. These come with SmartLock™ antenna orders. These are only if an existing customer for whatever reason needs a new one.

• 3" diameter
  
• Embroidered on twill
• Heat seal backing, sewing is recommended to secure patch
  
• Velcro backed version has the hook side attached to back of patch and a die-cut loop piece that can be attached to an item. The loop side does not have heat seal backing.
• Ford Motor Company Trademark and Trade Dress used under license to Detroit Shirt Company.
• Shipping Fee is additional as this product is shipped by Detroit Shirt Company

• 4" x 4"
• Screen Printed
• Made in USA
• Ford Motor Company Trademark and Trade Dress used under license to Detroit Shirt Company.
• Shipping Fee is additional as this product is shipped by our partners at Detroit Shirt Company

• 4" x 4"
• Screen Printed
• Made in USA
• Ford Motor Company Trademark and Trade Dress used under license to Detroit Shirt Company.
• Shipping Fee is additional as this product is shipped by our partners at Detroit Shirt Company

• 4" x 4"
• Screen Printed
• Made in USA
• Ford Motor Company Trademark and Trade Dress used under license to Detroit Shirt Company.
• Shipping Fee is additional as this product is shipped by our partners at Detroit Shirt Company

• 4" x 4"
• Screen Printed
• Made in USA
• Ford Motor Company Trademark and Trade Dress used under license to Detroit Shirt Company.
• Shipping Fee is additional as this product is shipped by our partners at Detroit Shirt Company

• 4" x 4"
• Screen Printed
• Made in USA
• Ford Motor Company Trademark and Trade Dress used under license to Detroit Shirt Company.
• Shipping Fee is additional as this product is shipped by our partners at Detroit Shirt Company