FORD - BULLET ANTENNA - TUFFLOCK /TUFFGUARD

  1. Your package should include 1 antenna and 2 threaded studs. (See reference images below)
  2. Remove your current antenna.
  3. Clean the area, removing any dirt or residue to ensure the compound adhesive can properly adhere.
  4. Two threaded studs were included in your Ford/Dodge antenna. Compare the two threaded studs to your factory antenna threads, and select the stud that matches.
  5. Install the red end of the stud fully into the antenna by hand.
  6. Thread the antenna into the truck by hand until the logo is facing your desired location. You do not need to have it fully tightened all the way down, if you want to unscrew it a partial turn so the logo is facing the direction you desire, that is OK. The thread compound will hold it in place. 
  7. The thread locking compound will take some time to fully set. The vehicle is safe to use and drive at any time.
  8. If you are having issues with antenna bases not fitting, please reference the images below to ensure you have received the correct antenna studs. If neither studs fit, please reach out to us and include images of the parts you received, also a picture of your trucks antenna base (on the hood of the truck) and include your trucks Model & Year.